Brickwork
Painted brick, exposed walls, façades, garden walls and restoration projects where a coating or surface build-up needs assessing for removal.
Home / Services / Brick & Stone Abrasive Blasting
Mobile masonry surface preparation
Brick & Stone Blasting
Careful abrasive cleaning and coating removal for brickwork, natural stone and masonry. The process should be matched to the substrate, mortar, coating and finish rather than treating every wall the same.
Applications
Where this service fits.
“Sandblasting” is the familiar search term, but modern surface preparation is broader than one abrasive or one pressure setting. The method should be selected around the material, coating, access and finish required.
Stonework
Stone walls, buildings and architectural masonry. Stone type and condition matter, so conservative methods or a trial area may be appropriate.
Masonry paint removal
Removal of compatible paints and coatings to expose the underlying masonry or prepare it for a new finish.
Surface build-up
Selected dirt, staining and unwanted surface layers where abrasive cleaning is appropriate after inspection.
Barns & outbuildings
Internal and external masonry preparation for renovation projects, conversions and exposed-feature walls.
Test areas
For sensitive or uncertain substrates, a small trial area can help establish the achievable finish before wider treatment.
Temporary illustrative image — replace with genuine OXIDE project photography when available.
Not one-size-fits-all
The surface comes first.
Abrasive blasting can be very effective on masonry, but brick hardness, stone type, mortar condition, previous coatings and the desired appearance all change the correct approach.
Older, soft, decorative or historically important masonry needs particular caution. Excessive pressure or an unsuitable abrasive can permanently alter a surface, so some projects may need a gentler process or a different cleaning method entirely.
Historic or listed property?
Tell us when requesting a quote. Conservation-sensitive masonry may need specialist advice, permissions or a trial area before any cleaning method is selected.
Tell us when requesting a quote. Conservation-sensitive masonry may need specialist advice, permissions or a trial area before any cleaning method is selected.
What we assess
Plan the preparation around the end result.
Good surface preparation starts by understanding what the surface is, what needs removing and what has to happen afterwards.
- Brick or stone type and condition
- Mortar strength and joint condition
- Coating type, age and thickness
- Access, protection and containment
- Desired final colour and texture
Quote information
Photos first
For the fastest initial assessment, send the postcode, approximate dimensions, overall photographs and close-ups of the coating or surface condition. Include the finish you want afterwards if you know it.
How it works
From enquiry to prepared surface.
The quote process is designed to qualify the job early, reduce unnecessary site visits and identify any risks or limitations before work is booked.
Send photos
Show the whole wall or elevation plus close-ups of the coating, masonry and mortar joints.
Assess
We review the substrate, access, containment and whether a test area looks appropriate.
Confirm scope
The likely process, limitations and any site checks are agreed before work starts.
Prepare surface
The area is protected and the surface prepared using a method suited to the job.
Operating area
Southern England
& South Wales
Mobile masonry surface preparation is intended for projects throughout Southern England and South Wales. Larger property, commercial and specialist jobs can justify wider travel, so send the postcode and photos even if the project sits outside the core area.
Check Your ProjectSouth WestCornwall, Devon, Somerset, Dorset, Bristol, Gloucestershire, Wiltshire and surrounding areas.
South CentralHampshire, Isle of Wight, Berkshire, Oxfordshire and surrounding areas.
South EastSurrey, West Sussex, East Sussex and suitable projects across the wider South East.
South WalesPembrokeshire, Carmarthenshire, Swansea, Neath Port Talbot, Cardiff, Newport and surrounding areas.
Common questions
Brick & Stone Abrasive Blasting FAQs.
Can you sandblast paint off brick?
Abrasive blasting can remove many paints and coatings from brick, but suitability depends on the brick, mortar, coating and condition. A controlled test area may be sensible on older or uncertain masonry.
Can natural stone be abrasive blasted?
Sometimes. Stone varies widely in hardness and porosity, so the stone type, condition and required finish need assessing before any method is chosen.
Do you actually use sand?
“Sandblasting” is the familiar search term, but modern abrasive blasting can use different non-silica media selected for the substrate and coating.
Will blasting damage mortar?
It can if the process is too aggressive or the mortar is weak. Mortar condition is therefore part of the initial assessment, especially with older lime joints.
Can listed or historic buildings be treated?
Potentially, but those projects need extra care. Relevant consent or conservation advice may be needed and abrasive treatment is not automatically the right method.
What should I send for a quote?
Send the postcode, approximate dimensions and several clear photographs: one showing the whole area and close-ups of the surface, coating and joints.
Painted brick or stone?
Send clear photographs, your postcode and an approximate size. We can use that to establish whether abrasive preparation looks suitable and what information is needed next.